Your shopping cart is empty!
High-pass filter «RF-BC-RX-1.8MHz»
High-pass filter "RF-BC-RX-1.8MHz" is designed to prevent receiver overloading by signals of MW Broadcast Radio Station. It must to be placed at the antenna input of the transceiver.
The filter is a multi-pole passive inductive-capacitive High Pass Filter, constructed in a solid aluminum casing. Please note: the filter is designed to connect only to the RX input of the transceiver.
The filter is connected to the antenna and the transceiver through the connectors RCA.
Each filter is supplied with the data on insertion loss (S21) and return loss (S11) parameters (measured by Vector Network Analyzer), frequency response graph and VSWR. These plots show the most detailed characteristics of each particular filter.
Specifications:
| Passband: | 1.8 - 60 MHz |
| Stopband: | 0 - 1.6 MHz |
| Loss in the passband: | no more then 0,5 dB |
| In stopband attenuation: | 40 dB |
| Impedance: | 50 Ohm |
| Dimensions of the filter: | 235x65x65 mm (9.24”x2.56”x2.56”) |
| Weight: | 0.3kg (0.66lbs) |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
